5.7x28 bolt action
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
5.7x28 bolt action
We all have seen that FN announced they would bring out a bolt rifle in the 5.7x28 chambering. Its been over two years since they announced the rifle, I wonder if you all think it will ever come.
Now, Brownells is offering a Shilen barrel for the Remington 700 action. I am a big fan of the 700, and would love to have one in 5.7. However, I don't know enough about custom rifle making to know what I don't know. From my research, 17 Fireball is the closest to 5.7 that the 700 is currently chambered in. The Fireball has a very similar overall length (about 6mm longer), but is about 1.6mm larger at the base. Is re-working a bolt for a new chambering something that is easily and commonly done? If so, roughly what kind of cost do you think would one be looking at?
The cheapest 700 in 17 Fireball I can find is in the $450 range. So add the $260 barrel, bolt work, barrel fitting/chambering, etc, and this turns into a project that could cost more than even FN's elevated pricing. If FN is really going to bring it out, I would rather pay a little more for an off the shelf solution. Thanks for your opinions.
Now, Brownells is offering a Shilen barrel for the Remington 700 action. I am a big fan of the 700, and would love to have one in 5.7. However, I don't know enough about custom rifle making to know what I don't know. From my research, 17 Fireball is the closest to 5.7 that the 700 is currently chambered in. The Fireball has a very similar overall length (about 6mm longer), but is about 1.6mm larger at the base. Is re-working a bolt for a new chambering something that is easily and commonly done? If so, roughly what kind of cost do you think would one be looking at?
The cheapest 700 in 17 Fireball I can find is in the $450 range. So add the $260 barrel, bolt work, barrel fitting/chambering, etc, and this turns into a project that could cost more than even FN's elevated pricing. If FN is really going to bring it out, I would rather pay a little more for an off the shelf solution. Thanks for your opinions.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
Try Midway for the bolt http://www.midwayusa.com/esearch.exe/se ... l_products" onclick="window.open(this.href);return false;
I'd be more worried about a workable magazine, or winding up with a single-shot bolt gun.
I'd be more worried about a workable magazine, or winding up with a single-shot bolt gun.
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
From everyone I've talked to a workable magazine or magazine adapter does not exist as of yet so your nicely converted rem.700 will be single shot only and for 2-3x the price of a TC contender or Encore.
As for the FNH version, I'll believe it's being released when me shite turns purple and smells like rainbow sherbert.
The day that happens though, I better have a lot of money set aside as I'll have a lot of commitments.
As for the FNH version, I'll believe it's being released when me shite turns purple and smells like rainbow sherbert.
The day that happens though, I better have a lot of money set aside as I'll have a lot of commitments.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Well hell, I didn't see the bolt there. That looks like my biggest concern isn't really an issue after all. So any short action plus the barrel and bolt, plus my gunsmith equals a functional 5.7x28 bolt action? If so, I think I'll dive in and get it built. I think I can work out the magazine thing with a little work.
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
Let us know if you do. A custom follower wouldn't be that hard to fab up. You'll want to get the rest assembled and get a mag of something that is as physically close to the 5.7 as possible, primarily in case width, take the factory follower, fill it with epoxy then use a dremel or small grinder to re-shape it as necessary, and go from there.
Re: 5.7x28 bolt action
My point of view,
Why not just get a .223? Same projectile, more powder. I understand the purpose of the 5.7x28 as a PDW and pistol round, but if you are going with bolt action, why bother?
If you really want to get creative get a license to make a full auto Five Seven. Then find out how many 30 round mags it takes before the plastic bursts into flames. Oh yea, and don't forget to post it on youtube! :lmao:
Why not just get a .223? Same projectile, more powder. I understand the purpose of the 5.7x28 as a PDW and pistol round, but if you are going with bolt action, why bother?
If you really want to get creative get a license to make a full auto Five Seven. Then find out how many 30 round mags it takes before the plastic bursts into flames. Oh yea, and don't forget to post it on youtube! :lmao:
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
Sometimes less is more.
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
Do I smell a Troll?
Either way, if you don't believe in doing things just because you can, you're only going to enjoy about half of what firearms have to offer.
Either way, if you don't believe in doing things just because you can, you're only going to enjoy about half of what firearms have to offer.
Re: 5.7x28 bolt action
Because its nice to go to the range and only have to worry about bringing the same type of ammo for pistol, PDW, and rifle?
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
I have several .223 rifles, and I just don't need another one, especially a bolt action. My collection is pretty well balanced, and I would like to get some more interesting items now that the basics are taken care of. I enjoy the idea of sharing a round in rifles and pistols. Since I sold my 17 HMR, I don't have a good varmit bolt action. So, if somebody is making barrels and bolts why not make a rifle in one of my favorite pistol cartridges? Think of the velocity possibilities with that 24" barrel and some well researched handloads. The search is on for a cheap short action 700. I'll keep you updated, thanks for all the help.User42 wrote:My point of view,
Why not just get a .223? Same projectile, more powder. I understand the purpose of the 5.7x28 as a PDW and pistol round, but if you are going with bolt action, why bother?
If you really want to get creative get a license to make a full auto Five Seven. Then find out how many 30 round mags it takes before the plastic bursts into flames. Oh yea, and don't forget to post it on youtube! :lmao:
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
The 17 Fireball is really close in length, the guys at Sportsmans Warehouse said I could try my 5.7 rounds in their 700 in 17 for fit. We'll see how it goes.ArtosDracon wrote:Let us know if you do. A custom follower wouldn't be that hard to fab up. You'll want to get the rest assembled and get a mag of something that is as physically close to the 5.7 as possible, primarily in case width, take the factory follower, fill it with epoxy then use a dremel or small grinder to re-shape it as necessary, and go from there.
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
17 fireball is a necked down .221 which is a shortened .222 which is what the .223 is based on. Length is close but diameter of the case is quite different, which could cause feeding problems. Length isn't as important as diameter, if the diameter is off the bullet isn't going to center properly at the top of the magazine and it won't feed right. IMHO at least.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Well I was thinking that the magazine block for the 17 fireball would be a good start to making it feed well, another follower might be a better fit diameter wise if cut down to the 17 block.
Re: 5.7x28 bolt action
No troll, that was a serious answer. I thought the purpose of the 5.7x28 round was to create pistol ammunition with the characteristics of a rifle round, for use in PDW and pistol platforms. That it does well, but if you are going to use a rifle, why bother? I would just as soon use a cheaper, more common, and more powerful rifle round to do the job. I see the point of a 5.7 AR upper for those that already have an AR lower, and hell I would love to see the video if you were to make a miniature belt fed 5.7 SAW variant or Gatling gun or something (they have done it with .22lr).
Don't get me wrong, I'm not saying don't do it. I'm just saying for any practical purpose I don't think its worth it. It's like hearing someone say they are going to drop a 4 cylinder VTEC engine in an older Dodge Charger. The VTEC works great in the cars its made for, but the Charger would benefit from the much larger V8 engine than it was made for. The conversion required to under power it seems a waste.
Ok you have me on that last point
Don't get me wrong, I'm not saying don't do it. I'm just saying for any practical purpose I don't think its worth it. It's like hearing someone say they are going to drop a 4 cylinder VTEC engine in an older Dodge Charger. The VTEC works great in the cars its made for, but the Charger would benefit from the much larger V8 engine than it was made for. The conversion required to under power it seems a waste.
Ok you have me on that last point
I admit I see things a bit differently, I don't want a PS90 because it would eat up all my best pistol ammo! Ok I admit it, it would eat up the Five Seven ammo, but I still want a PS90. :drool:f3rr37 wrote:Because its nice to go to the range and only have to worry about bringing the same type of ammo for pistol, PDW, and rifle?
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
I do see your point but, try not to think of it as competition for a riffle round in a riffle, try and remember that the round was designed for a pistol/pdw combo. Think 9m riffle compared to 5.7 riffle to understand the appeal a little better.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
OK, I talked to my gunsmith, and I think I've got it figured out. He dislikes working those custom bolts into a rifle when he can more simply machine, bush, and fit the original bolt. On the barrel front, he wants to use any 700 barrel bored and rifled for .224, then he will chamber it for 5.7. I'll figure out the magazine issues at a later date. So, after I find the right 700SA (most likely 17 Fireball) and a good raw barrel, the build is on.
-
- Banned
- Posts: 874
- Joined: 20 Aug 2008, 09:52
- Location: AZ
Re: 5.7x28 bolt action
Good Luck, let us know how it functions and the cost when all is said and done.
Re: 5.7x28 bolt action
:agree: In for pics and range report as well
Re: 5.7x28 bolt action
I'm just wondering,and I've been trying to see,if a mag for a .22 Hornet would work? my shop has some and I may try to see if a Hornet will be a close fit.
A bolt 5.7 with a 16 or 17in bbl and iron sights with a small scope/dot sight would be rather nice.
A bolt 5.7 with a 16 or 17in bbl and iron sights with a small scope/dot sight would be rather nice.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
I've thought that the Ruger 77/22H might make a decent starting point. The rotary magazine shouldn't require any mods. A box magazine probably would require some changes, but I haven't fiddled with any.
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
-
- Junior Member
- Posts: 1
- Joined: 05 Dec 2008, 13:36
Re: 5.7x28 bolt action
I can understand liking to play with rifles but if you already have a 77/22 in 22 Horney why spend all that money and time to basically duplicate the same ballistics of the Hornet while making it harder and more expensive to get ammo and brass?
Kind of sounds like an excersize if futility or an answer to no question.
Kind of sounds like an excersize if futility or an answer to no question.
Re: 5.7x28 bolt action
It's not really more expensive. .22 Hornet can be pretty expensive. I think the PRVI is like 20 bucks a box of 50.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
Actually, the point is that I (and most everyone else here) already have a source of lots of 5.7x28 ammo and brass. I don't have currently have anything in 22H, and I don't really want to deal with another cartridge (which the 22H would be, for me.)ladderstand wrote:I can understand liking to play with rifles but if you already have a 77/22 in 22 Horney why spend all that money and time to basically duplicate the same ballistics of the Hornet while making it harder and more expensive to get ammo and brass?
Kind of sounds like an excersize if futility or an answer to no question.
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
For me, its all about consolidating caliber. If I can carry a handgun that I really enjoy, and have a lightweight, accurate bolt action that gets even more velocity out of an already speedy round, I'm happy. Just look at the numbers EA is getting out of the FiveseveN, now think about the potential performance from a 20" bolt gun. I don't understand all the talk about expensive ammo. 5.7 costs less than brass cased .223, and is much less than .17 Fireball, the donor rife I plan to build my 5.7 rifle from.ladderstand wrote:I can understand liking to play with rifles but if you already have a 77/22 in 22 Horney why spend all that money and time to basically duplicate the same ballistics of the Hornet while making it harder and more expensive to get ammo and brass?
Kind of sounds like an excersize if futility or an answer to no question.
Re: 5.7x28 bolt action
Very interesting! how about an update? even though i think id go for at least 20" maybe even 22-24" barrel as for ps90 is 16 so you already know the basic ballistic capabilities!!im sure you would,or have,achieved 4-600 fps faster ?????
Re: 5.7x28 bolt action
still no update on wether achieved?
Re: 5.7x28 bolt action
I would question whether the 22-Hornet produces the same ballistics as the 5.7x28. Most data I see for the Hornet is out of a 24inch barrel....and yet they are almost comparable to 5.7x28 out of a 16 inch barrel. I'd be very interested to see what 5.7x28 would do out of a 24 inch barrel....unfortunately the main advantage of the 5.7x28 is excelent performance out of a relatively short barrel....so not too many people want to do that.
I will have an 18.5" barrel shortly (its been 8 weeks now). In retrospect, I wish I would have gone a little bit longer w/ it. Logic would dictate ~125fps improvement over the 16" PS90/AR57...however, the T/C is not blowback, so I should be able to push it a bit further.
I will have an 18.5" barrel shortly (its been 8 weeks now). In retrospect, I wish I would have gone a little bit longer w/ it. Logic would dictate ~125fps improvement over the 16" PS90/AR57...however, the T/C is not blowback, so I should be able to push it a bit further.
Re: 5.7x28 bolt action
I think you might even think about necking the 28 case down to either .17 or .20 cal. That should give you a really interesting round. What you would end up with is something a fair bit quicker than .17hmr and 5mm magnum rimfire and definetly more accurate. The costs for running the 28 case will be on par with buying that rimfire ammo. This may be what occurs. All remington short actions are the same length. The magazine is a bit of problem as it is internal. If you had a drop out mag you would be able to put in either a follower or a stop at the front to keep the rounds feeding properly. This project is something I am considering however at the present there is not enough info on it yet. The dies have just appeared over here but we will have to wait until somebody produces a rifle as pistols are banned over here. I will be interested to see when the bolt action rifles come out.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
Google "17 Velociraptor" or "20 Shrike"
I suspect that Calhoon's .19 caliber bullets would be just about perfect for this case.
I suspect that Calhoon's .19 caliber bullets would be just about perfect for this case.
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
Re: 5.7x28 bolt action
While a 5.7x28mm Bolt Action would be nice, I see it as an answer to a question that hasn't been asked. At this point in the .22 cal and under category, I dont think a ruger .204 can be beat.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Update.
Sorry for the delay guys, I was holding out for FNH to step up and sell one, but another SHOT come and gone with no love. So, I ordered my barrel, reamer, gauges, and stock this week. The action goes to the smith this week for blueprinting and bolt conversion. Unfortunately, the barrel lead time is almost comical in its length, but I'll keep you all posted.
Sorry for the delay guys, I was holding out for FNH to step up and sell one, but another SHOT come and gone with no love. So, I ordered my barrel, reamer, gauges, and stock this week. The action goes to the smith this week for blueprinting and bolt conversion. Unfortunately, the barrel lead time is almost comical in its length, but I'll keep you all posted.
- Esteves
- Wiki Moderator
- Posts: 3168
- Joined: 20 Aug 2008, 10:23
- custom title: Shhh!
- Location: Tucson, AZ
Re: 5.7x28 bolt action
Keep us posted!
Out of curiosity, what did you specify for the barrel? Twist? Chamber specs?
Out of curiosity, what did you specify for the barrel? Twist? Chamber specs?
--
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
S
© 2004-2019 Esteves
Political tags — such as royalist, communist, democrat, populist, fascist, liberal, conservative,
and so forth — are never basic criteria. The human race divides politically into those who want
people to be controlled and those who have no such desire.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
I went nuts. Its a Krieger in the Remington varmint profile, 20", fluted, threaded for 1/2x28 break, 1:14 twist, with no chamber. My smith will do all the chambering, one the barrel arrives, some time after pigs fly.Esteves wrote:Keep us posted!
Out of curiosity, what did you specify for the barrel? Twist? Chamber specs?
Re: 5.7x28 bolt action
Good choice on the barrel, keep us posted, if you figure the Mag thing out I might just have to build one up too.turbobrick wrote:I went nuts. Its a Krieger in the Remington varmint profile, 20", fluted, threaded for 1/2x28 break, 1:14 twist, with no chamber. My smith will do all the chambering, one the barrel arrives, some time after pigs fly.Esteves wrote:Keep us posted!
Out of curiosity, what did you specify for the barrel? Twist? Chamber specs?
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Well, the barrel arrived on Wednesday, and the whole box of parts is at the gunsmith now. Its his busy season, so I'm not too optimistic about getting the finished gun back soon. However, the barrel looked absolutely awesome. I'll definately be picking up another Krieger, if the barrel prints half as good as it looks. The gunsmith, who has been building guns longer than I have been alive, was really impressed with the finish, especially the fluting. He wasn't too excited about working of the magazine, so it'll be a single shot until I get it back and can try to figure it out.
Re: 5.7x28 bolt action
:ttiwwp:
Thanks for the update, just remember, pictures are worth a thousand words each
Thanks for the update, just remember, pictures are worth a thousand words each
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
I agree about the pics, but I felt it more important to get the barrel in his hands before he closed for the day. I went straight from UPS to his shop, and just beat his closing time (he has crazy hours 6am-2ish). Tons of pics to follow when the thing is finally done.
Re: 5.7x28 bolt action
I am with you on this. Though I am personally planning on building my own gun from scratch. I may even go as far as making my own action. I know I will be profiling the barrel. As to those who ask why do it, my answer is twofold. One, because I can. Two it would make a neat suppressed rifle with high velocity bullets that would really do a number on varmints, especially with a can. I think a bolt gun would be more accurate than the semi autos. Also I want a gun that uses common ammunition with my other guns, magazines too when possible. So my project profile includes using a FiveSeven magazine well probably to be machined from aluminum and fitted up to a stainless action. I must start to say that I have NOTHING written on paper other than objectives. No dimensions, no sources for prefab parts or shared info from other people who have done this before. So if we can work together maybe this can get off the ground, what say you?
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
I'll share any info I can provide. I'm also more than happy to loan out my reamer and headspace gauges once the gunsmith is done with them. I was also thinking about trying to adapt fiveseven mags, we'll see once the action is barreled and the H-S Percision stock.
Re: 5.7x28 bolt action
Thanks for the offer, but given that I am a gunsmith myself, I would like to have my own set of gauges and reamer. But we might be able to work together a bit. What sort of action did you decide to use?
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Its a brand new Remington 700, that was chambered in 17 Fireball, but only fired at the factory. I got it for a great price, cheaper than I could find anything used locally. It is the SPS-V, so I sold off the stock and made some money to put toward the all black HS Percision with full aluminum block that I really wanted. Its unlikely the take off barrel will have any value, but we'll see. The smith already blueprinted the action, and is using a big recoil lug since we're in there already. It will have a LeVang break (I like them on my .223 rifles), and a Badger extended bolt knob. The scope will be on a one piece Leupold single dovetail with 30mm medium rings. Scope TBD, likely my Nikko-Sterling 4-16X50 side focus.
Re: 5.7x28 bolt action
Sounds good! I may still go that route. If I can find enough time I will do something from scratch though as I have some pretty specific criteria.
Re: 5.7x28 bolt action
So how much is this little project gonna cost all said and done?turbobrick wrote:Its a brand new Remington 700, that was chambered in 17 Fireball, but only fired at the factory. I got it for a great price, cheaper than I could find anything used locally. It is the SPS-V, so I sold off the stock and made some money to put toward the all black HS Percision with full aluminum block that I really wanted. Its unlikely the take off barrel will have any value, but we'll see. The smith already blueprinted the action, and is using a big recoil lug since we're in there already. It will have a LeVang break (I like them on my .223 rifles), and a Badger extended bolt knob. The scope will be on a one piece Leupold single dovetail with 30mm medium rings. Scope TBD, likely my Nikko-Sterling 4-16X50 side focus.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
I'm trying to not think about that! :lmao:ynoty3k wrote: So how much is this little project gonna cost all said and done?
Honestly, I've traded and sold so many parts it will be hard to figure out total cost. Once the gunsmith gives me a bill, I'll try to put a dollar value on it. I will own the reamer and gauges though, that will be hard to factor in.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Well, its finally done, I got the rifle back on Friday, and fortunately got to head right to the range. After a few shots, I got her pretty quickly sighted in at 50 yards with factory 40 grain V-Max. I moved out to 100 yards, and things were looking great until the wind whipped up. There was obviously some drift going on, so I decided to do the fine tuning on another day. The recoil is basically non-existant, and I'll be interested to put in some chrono work, I'll also see what kind of POI changes happen with ss197. For now, its a single shot, but I will get right on a magazine solution.
Re: 5.7x28 bolt action
Of course now I want to know who did your work so I can have them do it for me too! Nice.....
-
- Senior Member
- Posts: 3201
- Joined: 08 Nov 2009, 21:01
Re: 5.7x28 bolt action
Damn fine looking gun. We expect full accuracy and reliability reports. And keep us updated on the mag work. Great job!
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: 5.7x28 bolt action
Don't know much about that model you have, what kind of bedding does it use?
Gun looks excellent! I'm sure your velocities are darn high versus any other 5.7 platform out there.
Gun looks excellent! I'm sure your velocities are darn high versus any other 5.7 platform out there.
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
The gun was built by well-known gunsmith Lee Baker. He's been in the game for a long time, and is a very talented and skilled man. Its an honor to own a gun he built. I'm actually bummed I didn't have him build a brake, since thats the only part I know of that he actually puts his name on. The HS Precision stock has a full length aluminum block that Lee fit to the oversized recoil lug. I'm not sure if he glass bedded the stock, but thats not usually needed with the aluminum block stocks.
Re: 5.7x28 bolt action
Do you have an aproximate total of what you spent? Also contact info for your smith? If I could simply buy a finished gun instead of having one built that would be better of course. I still think I can come up with a magazine well adapter for this that would take FiveSeven mags.
Re: 5.7x28 bolt action
wow, that sure is beautiful no matter what caliber it is in. Since it is in 5.7x28, its even better!
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Required stuff:WA-Tom wrote:Do you have an aproximate total of what you spent? Also contact info for your smith? If I could simply buy a finished gun instead of having one built that would be better of course. I still think I can come up with a magazine well adapter for this that would take FiveSeven mags.
Gun $430
Barrel $500
Stock $350
Headspace gauges and chamber reamer $170
Blueprint action, re-work bolt face, fit barrel to action, chamber barrel $450
Extras:
Base and rings $90
Scope $200
LeVang $40
- blueorison
- Competition/Training Mod
- Posts: 10672
- Joined: 11 Apr 2009, 14:28
- custom title: UT/EA Pistol Captain
- Contact:
Re: 5.7x28 bolt action
Wow, that's so affordable!
Not to mention you got an amazing deal on the original rifle. Thanks for the info! Spending the extra is always worth it, you pay for what you get!!
Maybe one day I'll be able start growing my money tree and afford the rifle :laugh:
Not to mention you got an amazing deal on the original rifle. Thanks for the info! Spending the extra is always worth it, you pay for what you get!!
Maybe one day I'll be able start growing my money tree and afford the rifle :laugh:
Never attribute to malice that which can be explained by stupidity.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
The shooter will always matter more than the gear ever will.
Stop relying on others to do the work for you.
Shoot more, worry less.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
The barrel does not have to cost that much. Fluting adds $150, threading for the brake was $70, stainless adds some cost too. I think the basic barrel could have been had for closer to $250. The project could be done for much less money, the original SPS-V stock would have worked just fine.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
OK, I got back to the range for some chrono work. I haven't been able to figure out a magazine, yet. Every time I get close, it looks like I can't do it without cutting into the bottom of the receiver. One more try before I commit that fully. I only have ss195, 197, and 192 at my disposal to test. I have some sized brass, powder, and projectiles, but have not loaded anything yet. I would also like to try some Elite stuff too. For comparison, averages in FPS:
Ammo type 195 197 192
FiveseveN 2100 1669 2008
5-7 Upper 2584 2073 2504
Bolt 5.7 2737 2176 2653
I was hating the stock X-Mark trigger, even though I like the X-Mark in one of my other rifles. So I tried to adjust it a little, and the screw split in half. The trigger still worked, but I decided to try a Rifle Basix, and so far it feels fantastic. We'll see how it works at the range, but I think the groups are going to tighten up.
Ammo type 195 197 192
FiveseveN 2100 1669 2008
5-7 Upper 2584 2073 2504
Bolt 5.7 2737 2176 2653
I was hating the stock X-Mark trigger, even though I like the X-Mark in one of my other rifles. So I tried to adjust it a little, and the screw split in half. The trigger still worked, but I decided to try a Rifle Basix, and so far it feels fantastic. We'll see how it works at the range, but I think the groups are going to tighten up.
Re: 5.7x28 bolt action
Usefull data, thank you. Just for my own edification, what is the grainweight of the SS195 bullet? This was the lead free hollow point version right?
- Rapier1772
- Global Moderator
- Posts: 12965
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: 5.7x28 bolt action
28gr hollowpoint. Yes, they're lead freeWA-Tom wrote:Usefull data, thank you. Just for my own edification, what is the grainweight of the SS195 bullet? This was the lead free hollow point version right?
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
Edited by poster for being dumb :facepalm: :laugh:
Nice rifle :thumb:
Nice rifle :thumb:
Last edited by flyingirish04 on 06 Jan 2012, 20:01, edited 2 times in total.
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Looks like I am back in the game! I will have a working shop by summertime for the first time in 6 years!! I have ordered a reamer and headspace gauges and I already have the barrel blank. I plan on making everything from scratch and working on this as a suppressed rifle, so we shall see how it turns out!
Re: 5.7x28 bolt action
what twist rate are you planning?
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
Curious, why are you spending so much on a barrel blank? I can get top of the line fluted custom barrels(Lilja, Krieger, benchmark) for way less than that. Anyone can. And wow, lathe costs and blue printing is expensive. Smiths really do get a heckuva a markup. Nice to have 'buddy rates' for my smithing.
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Well, given that I am doing the work myself I would have to defend those "smiths that get a heckuva markup". I see few ethical people making a killing in this business that the very govenrment that requires their own lisence seems to be trying to regulate out of existance. Barrel blanks cost about $150 for a good stainless one. Should take about 8-10hrs to machine just the barrel. Given that I value my time at around $20hr that makes for a $350 barrel. Maybe more. Then there's the cost of my machines, the special chamber reamer and go-nogo gauges that will rarely get used other than this job. Those are about $300. So, I can see how this project can get expensive.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
I wasn't commenting it was wrong. Market is what it is. I was commenting on how surprised I was for how much they can get for their trade. Good for them. It still is a good margin. That is what you do in business, maximize margins. I am just glad I don't have to pay that! I need to get my buddy better christmas and birthday presents! :thumb:
My point is on your earlier break down you said $500 for the barrel. Didn't make sense. You are talking what you would charge. That makes sense.
So you get barrels for $150? Wow. I can get a 15% off the sticker (around $350 for the contoured and fluted custom barrel) with a vet discount from Lilja, but thats is about as good as it gets. What brand can you buy for $150? And are you doing more than threading, chambering, sizing and crowning them?
My point is on your earlier break down you said $500 for the barrel. Didn't make sense. You are talking what you would charge. That makes sense.
So you get barrels for $150? Wow. I can get a 15% off the sticker (around $350 for the contoured and fluted custom barrel) with a vet discount from Lilja, but thats is about as good as it gets. What brand can you buy for $150? And are you doing more than threading, chambering, sizing and crowning them?
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
I am not sure you understand, I pay about $150 for a 1.25" diameter stainless barrel blank. No chamber, no threads, no contouring at all. Just a 30" long straight piece of stainless that has been gun drilled and rifled. That was the best price I could find. I would say if you can find a good price on one that is more finished, go for it! I would too. It would take me about 10hrs of machine time to chamber, profile, thread and any other cuts that need to be done.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
I understand what a barrel blank is.
You are buying a uncontoured barrel blank, contouring it, then doing the chambering and threading, crowning, sizing, etc. That uncountoured barrel costs $150 bucks. Ok, but who makes that barrel (just curious)? AND, why aren't you just getting it contoured from the barrel manufacturer? Saves you a ton of time.
You can get a barrel blank that is already contoured from just about any custom barrel shop. You can get one contoured for $300 from any of the top barrel manufacturers. Probably shoot tighter groups too. Contouring is a tricky thing with just a regular lathe to do it. The barrel guys have specialized lathes for that, and do it every day. That was what I was getting at. You may be good at doing it yourself though. Just wondering what I am missing, and if there is a cheaper way to do my builds. Make sense?
You are buying a uncontoured barrel blank, contouring it, then doing the chambering and threading, crowning, sizing, etc. That uncountoured barrel costs $150 bucks. Ok, but who makes that barrel (just curious)? AND, why aren't you just getting it contoured from the barrel manufacturer? Saves you a ton of time.
You can get a barrel blank that is already contoured from just about any custom barrel shop. You can get one contoured for $300 from any of the top barrel manufacturers. Probably shoot tighter groups too. Contouring is a tricky thing with just a regular lathe to do it. The barrel guys have specialized lathes for that, and do it every day. That was what I was getting at. You may be good at doing it yourself though. Just wondering what I am missing, and if there is a cheaper way to do my builds. Make sense?
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Ok, gotcha. I am at work now so my responses may be a bit short. I am planning on making a custom rifle from the ground up. Maybe making a form 1 suppressor for it as well. So turning a blank is really part of the plan. I suppose I could pay someone else to do the work, but why? I am a machinst by trade, I do home gunsmithing for fun. I expect to file for an FFL in the coming year so maybe this project will become a prototype of something bigger.
Re: 5.7x28 bolt action
After I got home I read our exchange on a desktop with more detail than my "smart" phone has. The blanks for my project are made by green mountain. The stainless 1/12 .224 blanks cost me about $150 if I recall. It's been over a year since I had a chance to look at it. I am back on the bandwagon since I am now looking to buy my first home with a two car garage ( shop space). I have ordered the reamer and gauges. I am looking forward to making some chips! I want to design my own rifle from the ground up, nothing ground breaking, old reliable tech, just for use with a 5.7 cartridge. My goal is to make it use FiveSeven pistol magazines that feed, fire and eject reliably. That said I hope it will also be accurate and with the suppressor be not very loud either.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
The reason most buy them contoured is because if it messes up the barrel harmonics and doesn't shoot tight, the barrel company will replace it. It is still a barrel blank, it's just that the contouring is already done. you still have to cut, size, chamber and thread.
I had a four contour Krieger and when one of my guns was built, it was grouping terribly. Checked the blueprint job, checked the bedding, even put it on another gun and it was clear the barrel was the issue. Krieger replaced it.
Have you used green mtn before? Never heard of them. That doesnt mean much though. I have only been in the custom world for a year or so. Before that all my knowledge was from hanging with benchrest shooters I know from my range. I will have to ask my bench rest and gunsmith buddies how they are.
Good luck. Looks like you have a great project. I never thought I would be a custom guy. Luckily I have a friend who is a smith, and all he requires me to do is buy the reamer and gauges and all the parts, and he puts together the rifle. Otherwise, this hobby would put me in the poor house for sure, because it is addicting, especially wildcatting.
I had a four contour Krieger and when one of my guns was built, it was grouping terribly. Checked the blueprint job, checked the bedding, even put it on another gun and it was clear the barrel was the issue. Krieger replaced it.
Have you used green mtn before? Never heard of them. That doesnt mean much though. I have only been in the custom world for a year or so. Before that all my knowledge was from hanging with benchrest shooters I know from my range. I will have to ask my bench rest and gunsmith buddies how they are.
Good luck. Looks like you have a great project. I never thought I would be a custom guy. Luckily I have a friend who is a smith, and all he requires me to do is buy the reamer and gauges and all the parts, and he puts together the rifle. Otherwise, this hobby would put me in the poor house for sure, because it is addicting, especially wildcatting.
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Green Mtn makes some really decent 10/22 barrels. I havent heard about any of their other barrels but I am sure it will be just fine for this application. He isnt making a 1000yd comp rifle.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
No, but a round like this needs a decent barrel none the less to maximize its efficacy at range. Its a varmint round in this setup, so it better be tight shooting, otherwise, what's the point.
I love the idea of using FsN mags. Love to see the detachable box assembly he machines. That will be cool.
I love the idea of using FsN mags. Love to see the detachable box assembly he machines. That will be cool.
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Nope, I figure 200 yards it should be quite accurate enough. If not I need to rework my approach some.
- flyingirish04
- Gold Member
- Posts: 4784
- Joined: 25 Aug 2008, 21:42
- custom title: Mtn Man in Flatland
- Location: Great Plains, USA
Re: 5.7x28 bolt action
I would hope you could develop loads out of a bolt gun in this round to shoot twice that in varmint hunting. Again, good luck, really look forward to your results.
Killed Two Stones with One Bird.
Re: 5.7x28 bolt action
Do you guys have any pics of your bolt guns?
Re: 5.7x28 bolt action
No pics so far, it's still in the drawing board and planning stage. I don't even have any prints drawn up for it yet. My machine shop is not even yet functional.
-
- Junior Member
- Posts: 28
- Joined: 07 Oct 2008, 22:01
Re: 5.7x28 bolt action
Still enjoying this little rifle, not getting a ton of range time, but enough to keep from going nuts.
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Hopefully this topic isn't completely forgotten about. Just curious if anyone here that has a bolt action 5.7 has had any issues with the 27 grain factory fn ammo? My 1:14 Shilleen barrel doesn't seem to like it, it keyholes every round.
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
5.7 uses the same bullets as .223. So ANY .223/5.56 rifled barrel will work for it.
Keyholing is normally an issue with too heavy a bullet and a long twist like 1:14. NOT the other way around.
Who the hell thought 1:14 was a good twist rate for a .223 round that likes lighter bullets? What are the rest of the numbers on the barrel? Have you checked them? Have you slugged the barrel to make sure it's the correct caliber?
I know of the one prototype Savage bolt action in 5,7. It's in the private hands of the guy who developed it for Savage. Savage decided not to put the rifle into production. It is a 1:9.
Keyholing is normally an issue with too heavy a bullet and a long twist like 1:14. NOT the other way around.
Who the hell thought 1:14 was a good twist rate for a .223 round that likes lighter bullets? What are the rest of the numbers on the barrel? Have you checked them? Have you slugged the barrel to make sure it's the correct caliber?
I know of the one prototype Savage bolt action in 5,7. It's in the private hands of the guy who developed it for Savage. Savage decided not to put the rifle into production. It is a 1:9.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Barrel is correct caliber, chamber is correct. The gun was not built to shoot 27 grain bullets, I just had some so shot them to see what it would do. They are relatively slow compared to what I load, 36 grain varmint grenades(5.5-5.7 grains of autocomp) which averaged 2320 FPS with 5.5 grains. I have not shot any of the 5.7 grain loads yet because it has been to miserable hot to do anything outside lately. No issues with gun as far as function. Gun info ispanzermk2 wrote:5.7 uses the same bullets as .223. So ANY .223/5.56 rifled barrel will work for it.
Keyholing is normally an issue with too heavy a bullet and a long twist like 1:14. NOT the other way around.
Who the hell thought 1:14 was a good twist rate for a .223 round that likes lighter bullets? What are the rest of the numbers on the barrel? Have you checked them? Have you slugged the barrel to make sure it's the correct caliber?
I know of the one prototype Savage bolt action in 5,7. It's in the private hands of the guy who developed it for Savage. Savage decided not to put the rifle into production. It is a 1:9.
Remington 700SA (was brand new 243 that got stripped)
PTG solid body bolt with medium sako extractor
Shileen #5 contour 16 inch barrel
Magpul Hunter 700 Stock
Timney 510 trigger
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
So update on the 27 grain bullet problem. Turns out it might have been a range problem(my range looks like a jungle at the moment), there were a few blades of tall grass in front of my target and I believe the bullet was hitting those and starting to tumble. I could be wrong but a fast moving small bullet can be affected by stuff like that. I say that because if I moved higher on the target away from grass, the keyholes stopped. The 36 grain loads did produce a 1in group this weekend so I believe the gun is as good as it is going to get for what it is. Buddies gun built a little different but same basic setup was getting .75 groups with american eagle ammo(40grain). My handloads might need some adjusting or tweaking still.
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
What was the total cost of this project?
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Well if I had to pin a number to it lets see if I can add it up. I am just a simple Arkansas man so will take my shoes off real quick.
Donor gun= 280
Bolt= 250
Barrel= 470
Trigger= 125
Magazine(yeah you read correct, it is not a bobsled gun, it actually holds ammo and feeds them =-0) Trade for an Timney Arisaka 7.7 trigger so basically free but market value 85 bucks give or take.
Stock/Bottom metal= Freebie
Brake= recycle from old gun
Scope= 300
Rings and base= recycle from old stuff
Machining(headspacing etc..)= practice for me so practically free minus lathe and tool costs that I already owned
Total= 1425..... so not much different than a ps90 and ten times as cool to shoot and look at than a ps90 any day of the week. Unless you count the money I recoup from selling the old parts, brand new 243 barrel, bolt body, bdl stock and x mark trigger, had cheap 3-9x30 simmons scope and rings so maybe 150 bucks resale value for all on a good day? If I could figure out how to post a picture you would see a few of it.
Donor gun= 280
Bolt= 250
Barrel= 470
Trigger= 125
Magazine(yeah you read correct, it is not a bobsled gun, it actually holds ammo and feeds them =-0) Trade for an Timney Arisaka 7.7 trigger so basically free but market value 85 bucks give or take.
Stock/Bottom metal= Freebie
Brake= recycle from old gun
Scope= 300
Rings and base= recycle from old stuff
Machining(headspacing etc..)= practice for me so practically free minus lathe and tool costs that I already owned
Total= 1425..... so not much different than a ps90 and ten times as cool to shoot and look at than a ps90 any day of the week. Unless you count the money I recoup from selling the old parts, brand new 243 barrel, bolt body, bdl stock and x mark trigger, had cheap 3-9x30 simmons scope and rings so maybe 150 bucks resale value for all on a good day? If I could figure out how to post a picture you would see a few of it.
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
:thumb:
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Last edited by Rapier1772 on 31 Aug 2016, 21:48, edited 1 time in total.
Reason: Nope but good enough to fix :D
Reason: Nope but good enough to fix :D
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
Very cool!
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Thanks, hope to get it dialed in really tight soon. Will keep updates coming in as well with handloads, I should be able to get pretty fast.
Re: 5.7x28 bolt action
What magazine did you use? Or where did you get it? I am building a rifle similar and really rather it be a repeater. Thank youroostercogburn wrote: ↑29 Aug 2016, 16:21Well if I had to pin a number to it lets see if I can add it up. I am just a simple Arkansas man so will take my shoes off real quick.
Donor gun= 280
Bolt= 250
Barrel= 470
Trigger= 125
Magazine(yeah you read correct, it is not a bobsled gun, it actually holds ammo and feeds them =-0) Trade for an Timney Arisaka 7.7 trigger so basically free but market value 85 bucks give or take.
Stock/Bottom metal= Freebie
Brake= recycle from old gun
Scope= 300
Rings and base= recycle from old stuff
Machining(headspacing etc..)= practice for me so practically free minus lathe and tool costs that I already owned
Total= 1425..... so not much different than a ps90 and ten times as cool to shoot and look at than a ps90 any day of the week. Unless you count the money I recoup from selling the old parts, brand new 243 barrel, bolt body, bdl stock and x mark trigger, had cheap 3-9x30 simmons scope and rings so maybe 150 bucks resale value for all on a good day? If I could figure out how to post a picture you would see a few of it.
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
I had help from a buddy to build a custom follower on a mill from aluminum. The magazine we used was a standard AI style mag with removable insert. I believe I got it from Midway. As far as the insert that is just a shoot from the hip and see what works with your rifle. It might take a couple of tries.Oberta003 wrote: ↑02 May 2017, 10:15What magazine did you use? Or where did you get it? I am building a rifle similar and really rather it be a repeater. Thank youroostercogburn wrote: ↑29 Aug 2016, 16:21Well if I had to pin a number to it lets see if I can add it up. I am just a simple Arkansas man so will take my shoes off real quick.
Donor gun= 280
Bolt= 250
Barrel= 470
Trigger= 125
Magazine(yeah you read correct, it is not a bobsled gun, it actually holds ammo and feeds them =-0) Trade for an Timney Arisaka 7.7 trigger so basically free but market value 85 bucks give or take.
Stock/Bottom metal= Freebie
Brake= recycle from old gun
Scope= 300
Rings and base= recycle from old stuff
Machining(headspacing etc..)= practice for me so practically free minus lathe and tool costs that I already owned
Total= 1425..... so not much different than a ps90 and ten times as cool to shoot and look at than a ps90 any day of the week. Unless you count the money I recoup from selling the old parts, brand new 243 barrel, bolt body, bdl stock and x mark trigger, had cheap 3-9x30 simmons scope and rings so maybe 150 bucks resale value for all on a good day? If I could figure out how to post a picture you would see a few of it.
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
So I think the magic weight for the bolt gun is 40 grain (used factory AE and had good results). Granted I only got 65 yards to plink with on the range it still holds a pretty good group. I averaged 2095 FPS with factory loads. Got some pull down 40 grainers coming from EA so may be able to load up some and get a few hundred more FPS.[img2=][img2=][/img2][/img2][/img2]
Last edited by roostercogburn on 16 Jul 2017, 13:37, edited 1 time in total.
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
Nice.
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
What do you think the interest level would be for a mag insert that would let folks be able to have a repeater Rem700 action built 5.7? Just gauging interest before I jump off a cliff with this thing. I know a million different factors come into play but just out of curiosity for me really.
- panzermk2
- Forum Supporter
- Posts: 12425
- Joined: 19 Aug 2008, 15:51
- Location: Pr. CEO Elite Ammunition
- Contact:
Re: 5.7x28 bolt action
No damn clue. But if you think you hear .223 is better than the 5.7 it will only get louder.
I just read a review of a Howa bolt action, but it was a short action. Howa, its a Mauser action, has a 1500 series short action rifle.
It comes in .223 which could be re chambered, they also have detachable magazine kits for the 1500.
Since the Rem is nothing more than a Mauser clone, Howa's are manufactured better in my opinion and cheaper. So it might be a better jumping off point.
http://www.firearmsnews.com/uncategoriz ... magazines/
https://www.legacysports.com/catalog/ho ... 500-hogue/
I just read a review of a Howa bolt action, but it was a short action. Howa, its a Mauser action, has a 1500 series short action rifle.
It comes in .223 which could be re chambered, they also have detachable magazine kits for the 1500.
Since the Rem is nothing more than a Mauser clone, Howa's are manufactured better in my opinion and cheaper. So it might be a better jumping off point.
http://www.firearmsnews.com/uncategoriz ... magazines/
https://www.legacysports.com/catalog/ho ... 500-hogue/
Jay Wolf
Pr. Elite Ammunition
Pr. Elite Ammunition
"Engineers, the oompa-loompas of science!"
Be'ein Tachbulot Yipol Am Veteshua Berov Yoetz
Re: 5.7x28 bolt action
I'll take one if available.roostercogburn wrote: ↑24 Jul 2017, 08:28What do you think the interest level would be for a mag insert that would let folks be able to have a repeater Rem700 action built 5.7? Just gauging interest before I jump off a cliff with this thing. I know a million different factors come into play but just out of curiosity for me really.
"Let us never forget that good intelligence saves American lives and protects our freedom."
-Ronald Reagan
-Ronald Reagan
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
panzermk2 wrote: ↑25 Jul 2017, 08:57No damn clue. But if you think you hear .223 is better than the 5.7 it will only get louder.
I just read a review of a Howa bolt action, but it was a short action. Howa, its a Mauser action, has a 1500 series short action rifle.
It comes in .223 which could be re chambered, they also have detachable magazine kits for the 1500.
Since the Rem is nothing more than a Mauser clone, Howa's are manufactured better in my opinion and cheaper. So it might be a better jumping off point.
http://www.firearmsnews.com/uncategoriz ... magazines/
https://www.legacysports.com/catalog/ho ... 500-hogue/
So I guess I should have been more specific. The starting magazine is one that would ideally fit any rifle that has aftermarket bottom metal that will accept an AI style magazine. The adapter in its current state only fits one type of magazine but could probably be adjusted for multiple brands. There are tons of manufactures that make those bottom metals and having some inlet work done on the stock is pretty common practice these days. I have a Howa 1500 in 308 that shoots .338 groups consistently so they are really close to Rem quality that I agree. Short action would be the only requirement I think to make it work. Got a buddy who has one (5.7) built on a model 7 SA and mine is built on a 700SA and they both work good in my opinion. Just ideas in my head I suppose for now.
Last edited by roostercogburn on 25 Jul 2017, 11:28, edited 1 time in total.
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
grimmond wrote: ↑25 Jul 2017, 10:49I'll take one if available.roostercogburn wrote: ↑24 Jul 2017, 08:28What do you think the interest level would be for a mag insert that would let folks be able to have a repeater Rem700 action built 5.7? Just gauging interest before I jump off a cliff with this thing. I know a million different factors come into play but just out of curiosity for me really.
Trying to tie up some loose ends and see how feasible it would be to make more than one of. Currently I spend a few hours with some delrin, a dremel, drill press, and my sanding machine to get one made. I don't have a milling machine yet but that would make it so much easier....sooooooon
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
New paint and testing groups with a can. [img2=][/img2]
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
60 yard groups with can. same poa/poi as uncanned. wish I could post a video for everyone to see it cycle.
- Rapier1772
- Global Moderator
- Posts: 12965
- Joined: 20 Aug 2008, 09:00
- Location: Benton City, WA
Re: 5.7x28 bolt action
That's a nice looking rifle, the fact that it shoots 5.7 makes it even better
How to post pics & videos: viewtopic.php?f=3&t=6363
Contrary to popular belief, you CAN fix stupid - it's just illegal.
-
- Junior Member
- Posts: 32
- Joined: 23 Aug 2016, 17:54
Re: 5.7x28 bolt action
Thanks, it continues to impress me evertime I shoot it. Found a good load and can't seem to crank them out fast enough to cover a shooting session.Rapier1772 wrote: ↑07 Jun 2018, 10:43That's a nice looking rifle, the fact that it shoots 5.7 makes it even better
Who is online
Users browsing this forum: No registered users and 1 guest